The Leading Manufacturer of Flexible PVC Dock Edging
With nearly two decades of experience manufacturing heavy-duty dock edging systems for commercial and private boat docks, EdgePro® Marine Dock Edging leads all others in quality and durability.
Made of durable, high-density polyethylene, ProLock™ is stronger than competitive chain lock products. ProLock™ simply pulls through itself and twists into a locking position. It’s also treated with UV inhibitors to prevent cracking or breaking down due to sun exposure. The carton offers efficient dispensing of the length needed, saving time and materials. Details:
Holds support stakes to smaller trees
Holds climbing plants to trellises, arbors, & lattice
Holds tomato plants to stakes
Holds grapevines to support wires
Also great for bundling cords & hoses
Manufactured in the USA from recycled polyethylene materials
Available Options:
ProLock™ ½” Chain Lock Tree Tie ProLock™ 1” Chain Lock Tree Tie
EasyFlex® P-Profile Marine Dock Edging provides an effective protective buffer between recreational boats and the edges of the dock that they come in contact with during docking. Our standard P-shape profile is designed for horizontal surfaces, typically attaching to the deck and fascia skirting areas. The dock edging is easily uncoiled, fit / cut to size for the install area, and anchored to the dock or pier. The recommended installation is 1-1/4 inch deck screws or nails approximately 4 inches apart through the 90-degree top lip and bottom extension.
Details:
Protects recreational boats and docks from damaging impact
Commercial-grade, double chamber P-Profile design intended for installation on horizontal dock surfaces
Colored through entire thickness unlike competitive products that “skin coat” the top surface
Easy to cut with a handsaw
Packaged in 16 and 25 foot coils
Manufactured in the USA from recycled materials
Available Options:
5000B Series – EasyFlex® P-Profile Marine Dock Edging in Black 5000W Series – EasyFlex® P-Profile Marine Dock Edging in White
EasyFlex® D-Profile Marine Dock Edging provides an effective protective buffer between recreational boats and the edges of the dock that they come in contact with during docking. Our standard D-shape profile is designed for both horizontal and vertical dock surfaces, typically attaching to the fascia skirting areas or vertical pilings. The dock edging is easily uncoiled, fit / cut to size for the install area, and anchored to the dock or pier. The recommended installation is 1-1/4 inch deck screws or nails approximately 4 inches apart on the top and bottom of the edging.
Details:
Protects docks and boats from damaging impact
Commercial-grade, single chamber D-Profile can be installed on vertical and horizontal on dock surfaces
Colored through entire thickness unlike competitive products that “skin coat” the top surface
Easy to cut with a handsaw
Packaged in 16 and 25 foot coils
Manufactured in the USA from recycled materials
Available Options:
5011B Series – EasyFlex® D-Profile Marine Dock Edging in Black 5011W Series – EasyFlex® D-Profile Marine Dock Edging in White
EdgePro® P-Profile Marine Dock Edging provides a protective buffer between boats and the edges of the dock that they come in contact with during docking. Our standard P-shape profiles are designed for horizontal surfaces, typically attaching to the deck and fascia skirting areas. All P-shape profiles possess an elongated design to provide increased contact area along the edge of the dock. The dock edging can be easily fit / cut to size for the install area and anchored to the dock or pier with 1-1/4 inch deck screws or nails approximately 4 inches apart through the 90-degree top lip and bottom extension.
Details:
Protects docks and boats from damaging impact
Elongated P-Profile design intended for installation on horizontal dock surfaces
Varying chamber designs provide a range of size and durability options
Colored through entire thickness unlike competitive products that “skin coat” the top surface
Easy to cut with a handsaw
Packaged in 10 foot lengths
Manufactured in the USA from recycled materials
Available Options:
5000 Series – EdgePro® 2-Chamber P-Profile Dock Edging in White, Black, or Grey 5001 Series – EdgePro® 3-Chamber P-Profile Dock Edging in White, Black, or Grey 5002 Series – EdgePro® 3-Chamber P-Profile Dock Edging in White, Black, or Grey 5005 Series – EdgePro® 4-Chamber P-Profile Dock Edging in White, Black, or Grey 5006 Series – EdgePro® 4-Chamber P-Profile Dock Edging in White, Black, or Grey
EdgePro® D-Profile Marine Dock Edging provides a protective buffer between boats and the edges of the dock that they come in contact with during docking. D-shape profiles provide great versatility, as they can be mounted vertically or horizontally, typically attaching to the fascia skirting areas or vertical pilings. The dock edging can be easily fit / cut to size for the install area and anchored to dock or pier with 1-1/4 inch deck screws or nails approximately 4 inches apart on the top and bottom of the edging.
Details:
Protects docks and boats from damaging impact
Commercial-grade, D-Profile for installation on horizontal and vertical dock surfaces
Varying chamber designs provide a range of size and durability options
Colored through entire thickness unlike competitive products that “skin coat” the top surface
Easy to cut with a handsaw
Packaged in 10 foot lengths
Manufactured in the USA from recycled materials
Available Options:
5007 Series – EdgePro® 4-Chamber D-Profile Dock Edging in White, Black, or Grey 5008 Series – EdgePro® 4-Chamber D-Profile Dock Edging in White, Black, or Grey 5011 Series – EdgePro® 1-Chamber D-Profile Dock Edging in White, Black, or Grey
One product, two looks. EasyFlex® 2-in-1 Landscape Edging allows you to select which border style to use for your DIY landscape project. Use the flat, straight edge for a traditional look with clean, crisp lines, or flip the edging over with the scallop design up for a decorative finished look. Also choose from a wood grain texture wall or a smooth edging wall in black, brown, or red. Either way, your garden or flower bed will have a clean edge to provide a barrier between your plants and grass or weeds.
Easily install EasyFlex® 2-in-1 Landscape Edging in three simple steps:
1) Score the ground along your garden or flower bed.
2) Insert the edging into the scored section and hammer anchoring stakes (included) into the ground every 4 feet.
3) Backfill the edging with your desired ground cover. 2.5 inches should be inserted into the ground to stabilize the edging adequately.
Details:
Requires some digging for traditional buried edging installation to preferred height; moderate installation difficulty
Anchoring stakes help hold edging in place
Project kits include edging and 6 heavy-duty anchoring stakes
Boxed coils are available in 20′ lengths
Longer length coils minimize spliced connections between pieces and their compact form allows them to be shipped and handled easily and efficiently
Manufactured in the USA from recycled polyethylene compound
U.S. Patent No. D797,320 & Canadian Patent Pending
Available Options:
EasyFlex® 2-in-1 Landscape Edging 3.5” tall (1.5” above ground when installed), Wood grain texture or smooth EasyFlex® 2-in-1 Landscape Edging 4.5” tall (2.5” above ground when installed), Wood grain texture or smooth
EasyFlex® Tree Trunk Protectors are designed to shield tree trunks from damaging string trimmers while also protecting against bark damage from gardening equipment, tools, rodents, and other small pests. Each protector stands 9″ tall and is manufactured in round tube form, which allows it to keep its shape, even in hot sun. This product is not intended for use as a deer guard.
Details:
Easy to install
Protectors are made to match the bark color of most young trees
For larger trees locking tabs connect multiple protectors
Available in a variety of case sizes from 3-count up to 100-count
Manufactured in the USA from recycled polyethylene compound
Unlike steel landscape edging products, EasyFlex® Aluminum Landscape Edging is lighter, easier to bend for curves, and does not rust or corrode. The unique overlapping connection design eliminates the need for a separate connector. Aluminum edging is an ideal option in extremely hot climates or anywhere that a high end professional look is desired.
Details:
Permanent & low maintenance
Ends slide together for easy installation
For landscape beds, gardens, tree rings, walkways, and pathways
Spike accessory packs are also available for separate purchase
Sold in 24’ and 48’ project kits or individual pieces
Original Pound-In Landscape Edging (Smooth Top Design)
EasyFlex® Pound-In Landscape Edging allows do-it-yourselfers to vary the height of their edging installation from just 0.5″ up to 2.5″ tall. The bottom “teeth” are tapered in thickness and alternate in size to provide easier penetration into the ground with minimal digging. Dimex is the only manufacturer to offer pound-in landscape edging in a continuous coil design which minimizes connection points versus shorter length competitive pound-in products.
Details:
Designed to pound into the ground with a rubber mallet
Project kits include edging and 2 heavy-duty anchoring stakes
Boxed coils are available in 12′ and 20′ lengths
Longer length coils minimize spliced connections between pieces and their compact form allows them to be shipped and handled easily and efficiently
Manufactured in the USA from recycled polyethylene compound
U.S. Patent No. D776,834 & Canadian Patent No. 170571
Decorative Pound-In Landscape Edging (Scallop Top Design)
For those that prefer a more decorative look, Dimex offers EasyFlex® Decorative Pound-In Landscape Edging with a popular scallop top design. The decorative scallop top of the edging sits above ground, while the bottom “teeth” are tapered in thickness and alternate in size to provide easier penetration into the ground with minimal digging. Dimex is the only manufacturer to offer decorative pound-in landscape edging in a continuous coil design which minimizes connection points versus shorter length competitive pound-in products.
Details:
Designed to pound into the ground with a rubber mallet
Project kits include edging and 2 heavy-duty anchoring stakes
Boxed coils are available in 12′ and 20′ lengths
Longer length coils minimize spliced connections between pieces and their compact form allows them to be shipped and handled easily and efficiently
Manufactured in the USA from recycled polyethylene compound
U.S. Patent No. D797,319 & Canadian Patent Pending
Available Options:
EasyFlex® Scallop Top Pound-In Landscape Edging Landshark® Scallop Top Pound-In Landscape Edging
EasyFlex® Aluminum Paver Edging is a high-end edge restraint and can be used for a variety of commercial and residential applications including: sidewalks, patios, and even driveways. The 1.6” tall L-shape profile can be installed with horizontal anchoring tabs adjacent to or underneath the pavers. This aluminum profile is great for straight sections and is flexible enough to make curves and angles with ease.
Details:
Project kits include edging and spikes
Also available in 6′ single lengths
Spike accessory packs are also available for separate purchase
Ready to use for straight sections or clip spine where needed for curves
Horizontal tabs can be installed adjacent to or underneath pavers
Predrilled holes make anchoring spikes easy to install
Keep your decks, patios, and garage floors looking new with GrillTex® Under the Grill Protective Deck and Patio Mats. Whether you’re making a quick meal or preparing for a neighborhood barbecue, place a mat under your outdoor grill for easy clean up and to protect your concrete, wood, and other surfaces from any spills and splatters. Heat resistant up to 500 degrees Fahrenheit, this protective mat is ideal for use under most traditional gas grills. For best fit, select the mat size that allows a minimum of 2 to 3 inches of coverage around the perimeter of your grill.
Made with recycled synthetic rubber, this mat won’t stain the surface underneath and stays put under your grill to provide a protective barrier against grease, embers, oils, and sauces. Each mat contains an antimicrobial and fungistatic agent to keep your mat safe from microorganisms that can cause it to deteriorate. For simple clean-up, rinse with soap and water or a garden hose.
Details:
This protective mat stays safely in place under your grill to collect spills and splatters.
Protect your deck, patio, or garage floor from water, sauce, grease, and oil.
Recycled rubber provides a protective barrier without staining the surface underneath.
Synthetic rubber provides heat resistance up to 500 degrees Fahrenheit.
When ready to clean, simply rinse with soap and water or a garden hose.
ClimaTex® Indoor/Outdoor Rubber Scraper Mats are durable and affordable flooring solutions for protecting floors from damage and increasing traction on slippery surfaces. Our rubber scraper mats provide the textured pattern to clean boots and shoes. Suitable for indoor and outdoor use, the proprietary blend of rubber material makes ClimaTex® Scraper Mats durable, light-weight, and long-lasting. Even when used as an outdoor scraper mat or an industrial floor mat, our scraper mats will withstand the harshest environments. Dimex heavy-duty scraper mats are used as commercial entry mats, outdoor shower floor mats, non-slip garage floor mats, or even patio entry mats. They are ideal for indoor use as a hall or entry mat to protect wood, tile, or laminate floors and to keep them clean.
Details:
UV and weather resistant
Traps mud & dirt
Easy to clean
Non-skid
For residential and commercial environments
Available in 36” width in multiple lengths
Manufactured in the USA using recycled synthetic rubber materials
ClimaTex® Indoor/Outdoor Rubber Runner Mats are durable and affordable flooring solutions for protecting floors at the office or around the home. Our textured rubber mats provide traction and have a diagonal pattern to clean boots, shoes, and paws to help minimize tracking in dirt and mud. Suitable for indoor and outdoor use, ClimaTex® Runner Mats are made to withstand weather and frequent use. The proprietary blend of recycled synthetic rubber materials provide an eco-friendly mat that is durable enough to weather the elements and not degrade or deteriorate. ClimaTex® Rubber Runner Mats are used in kitchens, garages, workshops, manufacturing facilities, offices, and more to keep floors clean and offer increased traction. Our runner mats are also used at indoor playgrounds, fitness facilities, and commercial entryways to reduce sound and vibration, protect equipment, and preserve floors.
Dimex runner mats are beneficial outdoors as well to use under a grill, to protect decks and patios from splattering, in breezeways to prevent tracking mud and water between indoor areas, on boat docks for traction on wet surfaces, while camping to leave nature outdoors, or while tailgating at the big game.
Details:
UV and weather resistant
Traps mud & dirt
Easy to clean
Non-skid
For residential and commercial environments
Available in 27” width in multiple lengths
Manufactured in the USA using recycled synthetic rubber materials
Made of durable polyethylene, ArborGard+® shields tree trunks from damaging string trimmers. ArborGard+® also protects against bark damage from gardening equipment, tools, rodents, and other small pests. Holes are sized to prevent insect infestation and bark rot. ArborGard+® is manufactured in round tube form and unlike flat tree guards, will not lose its coil shape in hot sun.
Details:
Easy to install
Protectors are made to match the bark color of most young trees
Unique expansion tabs allow two or more units to be combined to protect trees larger than 4” in diameter
Manufactured in the USA from recycled polyethylene materials
Original No-Dig Landscape Edging® (Smooth Top Design)
EasyFlex® No-Dig Landscape Edging® capitalizes on a fast-growing DIY landscaping trend toward clean-looking bed lines that are quick and easy to install. The 1.5″ tall, L-shaped profile sits on the ground surface, eliminating the need to dig or trench for installation. This profile design also offers superior flexibility and workability versus competitive products.
Easily install EasyFlex® Original No-Dig Landscape Edging® in two easy steps:
1) Clear the area of debris and align the edging to the shape of the bed
2) Use a mallet to pound the anchoring spikes (included) into the ground
Details:
Project kits include edging, anchoring spikes, and connector(s)
Extra spike accessory packs are also available for separate purchase
Coils are available in a variety of lengths from 12′ up to 100′
Longer length coils minimize spliced connections between pieces and their compact form allows them to be shipped and handled easily and efficiently
Spike holes on each tab allow versatile spike placement around rocks and tree roots
Easily cut edging to length as needed
Heavy-duty contractor grade option available
Manufactured in the USA from recycled polyethylene compound
U.S. Patents No. D733,936; D748,822; D748,823; D773,074; D800,352; U.S. Patent Pending; Canadian Patents No. 154108 & 159149; Canadian Patent Pending
EasyFlex® Scalloped Top No-Dig Landscape Edging® gives your landscaping a decorative look with the scalloped edge and wood grain texture, available in black, brown, or red. It is flexible enough to create tight circles around trees, and the patented No-Dig L-shaped design eliminates damage from digging into tree and plant roots. Use No-Dig Edging® with weed fabric for an extra layer of weed protection. The spiral spikes easily pierce through weed fabric and help secure the barrier. The 2.5-inch-high edging option is strong enough to retain bedding materials including pine needles, lava stone, river rock, cedar, plastic, wood mulch, and more. The scalloped decorative edge provides a lovely finish to any gardening or landscaping project. Designed for quick and easy installation, no digging is required. Also available in smooth wall.
Easily install EasyFlex® Scalloped Top No-Dig Landscape Edging® in two easy steps:
1) Clear the area of debris and align the edging to the shape of the bed
2) Use a mallet to pound the anchoring spikes (included) into the ground
Details:
Project kits include edging, anchoring spikes, and connector(s)
Spike accessory packs are also available for separate purchase
Coils are available in a variety of lengths from 20′ up to 100′
Longer length coils minimize spliced connections between pieces and their compact form allows them to be shipped and handled easily and efficiently
Spike holes on each tab allow versatile spike placement around rocks and tree roots
Easily cut edging to length as needed
Manufactured in the USA from recycled polyethylene compound
U.S. Patents No. D733,936; D748,822; D748,823; D773,074; D797,320; D800,352; U.S. Patent Pending; Canadian Patents No. 154108 & 159149; Canadian Patent Pending
Available Options:
EasyFlex® Scalloped Top Wood Grain Wall No-Dig Landscape Edging®, 2″ or 2.5″ wall height, black, brown, or red EasyFlex® Scalloped Top Smooth Wall No-Dig Landscape Edging®, 2″ or 2.5″ wall height, black ProFlex™ Scalloped Top No-Dig Landscape Edging®
Decorative No-Dig Landscape Edging®
EasyFlex® Decorative No-Dig Landscape Edging® offers a charming, decorative finish for small landscaping projects around trees, mailboxes, and small flower beds. With an easy sliding connection system and flexibility for circular installations or curves, this edging is a quick and simple method for adding an ornate touch to your landscaping project. Choose from Black Wrought iron-look or Adirondack style with a wood grain texture in white or brown.
Easily install EasyFlex® Decorative No-Dig Landscape Edging® in two easy steps:
1) Clear the area of debris and align the edging to the shape of the bed
2) Use a mallet to pound the anchoring spikes (included) into the ground
Details:
Project kits include edging and anchoring spikes
Available in 5′ or 10′ kits
Simple sliding connection system for easy installation
Spike holes on each connecting tab allow flexibility for placement around trees or other circular installations
Manufactured in the USA from recycled polyethylene compound
U.S. Patent Pending
Available Options:
EasyFlex® Decorative No-Dig Landscape Edging®, Adirondack style, White or brown EasyFlex® Decorative No-Dig Landscape Edging®, Wrought iron-look
Dimex™ Office Chair Mats provide industry leading clarity, superior wear resistance and a surface that allows chairs to move freely. Replacing or repairing hardwood and laminate floors can be expensive! Protect your investment with a durable Dimex™ Chair Mat that is engineered to protect your floor from wear due to the wheels of your office chair rolling back and forth over time. Our proprietary material formula features industry-leading performance and clarity, a product of our rigorous roller wear, extreme temperature change, humidity, and stain resistance testing.
Details:
Gripper backing options for low and medium pile carpets
Smooth backing option for hard floors
Wear tested for durability and resistance to cracking
Manufactured in the USA
Choose the Right Mat for Your Floor
Is your floor carpet or hard surface?
Chair mats for carpet are designed with a “gripper” backing that holds the mat in place. Hard floor mats are smooth or lightly textured on the underside to avoid damage to hard floor surfaces. Never use a “gripper” backed mat directly on hard floors or on an area rug over a hard floor surface.
What is your carpet pile depth?
Understanding your carpet pile depth is critically important to the performance of your chair mat. To determine the thickness of your carpet pile, place a penny on it’s edge down in the carpet pile (like measuring a tire tread). Example: If Lincoln’s chin is above the carpet pile, your carpet is 1/4″ or less.
Dimex™ PVC Control Joints are extruded vinyl gaskets used in industrial and commercial block construction to reduce air and water penetration. The recycled PVC compound conforms to ASTM D-2287-654 with a durometer hardness of 85±5 Shore A when tested in conformance with ASTM D-2240. Dimex™ PVC Control Joints are available in the following profile options:
Black (48” Lengths)
DX2011 – 2.625” Standard PVC Control Joint DX2012 – 6.875” Wide Flange PVC Control Joint DX2013 – 11.125” Wide Flange PVC Control Joint DX2014 – 2.625” Tee PVC Control Joint
Grey (32” Lengths)
DX2016 – 2.625” Tee PVC Control Joint DX2017 – 2.125” Standard PVC Control Joint DX2018 – 6.875” Wide Flange PVC Control Joint DX2019 – 11.125” Wide Flange PVC Control Joint
EasyFlex® Paver Edging is made from contractor grade PVC and can be used with a variety of commercial and residential applications including: sidewalks, patios, and even driveways. The 1.75″ tall L-shape profile can be installed with horizontal anchoring tabs adjacent to or underneath the pavers. Our vinyl paver edging systems are heavier and stronger than competitive products made from polyethylene and flexible enough to follow curves and designs.
Details:
Project kits include edging and spikes
Also available in 6′ single lengths
Spike accessory packs are also available for separate purchase
Ready to use for straight sections or clip spine where needed for curves
Horizontal tabs can be installed adjacent to or underneath pavers
Predrilled holes make anchoring spikes easy to install
Can be cut with a regular hacksaw
Manufactured in the USA from recycled PVC compounds
EdgePro® Paver Restraint Products are engineered to provide heavy-duty support for paver walkways, patios, and driveways. Manufactured from durable recycled PVC material, EdgePro® will save you time and money over concrete, wood, and metal edge restraint options that rot or crack and can be difficult to install. The rugged L-shaped profile provides several benefits:
Allows versatile installation options with anchoring tabs underneath or adjacent to the pavers
Eliminates turf “brownout” by enabling maximum backfill against pavers
Pieces easily nest together for compact packaging and storage
Available Options:
EdgePro® Flexible and EdgePro® Rigid Paver Restraint Heavy-duty vinyl edge restraint system for 60mm interlocking concrete or brick pavers. EdgePro® Paver Restraint is designed with a 1.75″ vertical wall height for use on residential and commercial projects. Rigid option available for installations that require straight lines.
EdgePro® ONE Paver Restraint (Clip-to-Flex) Heavy-duty vinyl edge restraint system for 60mm interlocking concrete or brick pavers. EdgePro® ONE has the familiar look of EdgePro® Paver Restraint, except with a spine of cross supports that can be clipped to transform from rigid to flexible in just a few seconds.
EdgePro® Low Profile Flex and EdgePro® Low Rigid Paver Restraint Heavy-duty vinyl edge restraint system for 40mm interlocking concrete or brick pavers. EdgePro Low Profile® features a 1.25″ vertical wall height that makes it ideal for thinner paving applications, including flagstone and wet cast pavers. Rigid option available for installations that require straight lines. US Patent No. D541,952.
NovaFlex™ Paver Restraint Lightweight, yet durable vinyl edge restraint system for 60mm interlocking concrete or brick pavers. NovaFlex™ features a 1.75″ vertical wall height that makes it ideal for residential paver projects.
The familiar chair mat shapes on the market today were developed over 50 years ago when pedestal desks were popular. The traditional rectangular “lip” fit the narrow opening for the legs, offering additional protection from wheel wear in that space. Over the last half century, as office chairs evolved from 3-wheel and 4-wheel bases to the more stable 5-wheel base design and pedestal desks evolved into more open modern style for the office and home, the advancement of chair mats got left behind. Until now…
Evolve™ Modern Office Chair Mats are the result of extensive research on how we move in our workspace relative to today’s office chair and contemporary furniture designs. The wide tapered front lip and radius back corners of the lip mat and radius corners of the rectangle mat work in concert with the circular footprint of the 5-star wheel base to offer more efficient use of the roll-able surface of the mat. Evolve™ patented designs bring chair mats into the 21st Century.
Replacing or repairing floors can be expensive! Evolve™ Chair Mats protect that investment from wear due to the wheels of office chairs rolling back and forth over time. Our proprietary material formula features industry-leading performance and clarity, a product of our rigorous roller wear, extreme temperature change, humidity, and stain resistance testing.
Modern design meets efficiency.
Efficient Use of Lip Area
Traditional Shape (Left):
The corners of the rectangular-shaped lip are seldom used. As a wheel rolls to one of those corners, other wheels are already off of the mat.
Evolve Modern Shape (Right):
The front lip is curved to accommodate the circular footprint of today’s 5-star wheel bases found on nearly all office chairs.
Efficient Use of Back Corners
Traditional Shape (Left):
Similar to the lip, the back corners cannot accommodate the round footprint of the circular wheel base.
Evolve Modern Shape (Right):
As the chair moves near the back edge of the mat, the contoured back corners are fit the 5-star wheel base footprint.
Wide, Tapered Modern Lip
Traditional Shape (Left):
The most common problem area with the traditional design is the corners between the lip and body of the mat, where wheels often roll off and can get stuck.
Evolve Modern Shape (Right):
The wide, tapered modern lip allows for more wheel space at the front of the mat, which minimizes the likelihood of roll-offs.
Choose the Right Mat for Your Floor
Is your floor carpet or hard surface?
Chair mats for carpet are designed with a “gripper” backing that holds the mat in place. Hard floor mats are smooth or lightly textured on the underside to avoid damage to hard floor surfaces. Never use a “gripper” backed mat directly on hard floors or on an area rug over a hard floor surface.
What is your carpet pile depth?
Understanding your carpet pile depth is critically important to the performance of your chair mat. To determine the thickness of your carpet pile, place a penny on it’s edge down in the carpet pile (like measuring a tire tread). Example: If Lincoln’s chin is above the carpet pile, your carpet is 1/4″ or less.
Hard Floors
Low Pile Carpet up to 1/4″ thick
Low-Med Pile Carpet up to 3/8″ thick
Details:
The ONLY chair mat specifically designed for today’s 5-star wheel base chairs
Gripper backing options for low and medium pile carpets
Smooth backing option for hard floors
Wear tested for durability and resistance to cracking
GREENGUARD Gold certified by UL for low indoor air emissions
Manufactured in the USA
US Patent Nos. 9,962,027; D840,720; D841,361 and Canadian Patent Nos. 170522, 174788, 174789, 174790, 177569
A premium blend of recycled polyethylene gives EdgePro® Poly Landscape Edging its superior flexibility, strength, and resistance to weathering. Thorough product engineering and quality control assures landscape professionals that all EdgePro® Poly Landscape Edging Products meet the high standards and demands of the industry. The product will not crack, rot, or deteriorate from exposure to weather conditions and will be free of manufacturing defects. EdgePro® Poly Landscape Edging is manufactured in the USA from recycled polyethylene materials.
Available Options:
EdgePro® Generic Landscape Edging EdgePro® Generic features standard contractor-grade design that balances the durability that landscape professionals demand with a value price point. Each 5” x 20′ strip weighs 5 lbs. (not including stake kit) and is available bundled.
EdgePro® Professional Landscape Edging EdgePro® Professional stands 5.5” from top to bottom, making it one of the tallest poly landscape edging products on the market. Its unique longitudinal side rib provides enhanced support and stability to the edging wall. The extra-heavy top bead is engineered to withstand string trimmer abuse and UV sun exposure. Each 5.5” x 20′ strip weighs 6 lbs. (not including stake kit) and is available bundled.
EdgePro® ProLip Landscape Edging EdgePro® ProLip is designed with the longest V-Lip in the market, providing industry- leading protection against frost heave. It is manufactured with the same extra-heavy top bead and UV protection as EdgePro® Professional. Each 5” x 20′ strip weighs 6 lbs. (not including stake kit) and is available bundled and coiled.
EdgePro® Hi-Test Landscape Edging EdgePro® Hi-Test features a unique, corrugated side baffle and durable T-Lip that provides excellent grip in a variety of soil types. The extra-heavy top bead is engineered to withstand string trimmer abuse and UV sun exposure. Each 5″ x 20′ strip weighs 7 lbs. (not including connector) and is available bundled.
EdgePro® No-Dig Landscape Edging® EdgePro® No-Dig Landscape Edging® provides quick and easy installation of clean-looking bed lines. The heavy duty 1.5″ tall, L-shaped profile sits on the ground surface, eliminating the need to dig or trench for installation. Ideal for use around trees and adjacent to sidewalks where digging can be problematic. EdgePro® No-Dig Landscape Edging® is manufactured from recycled polyethylene compound that offers superior flexibility and workability versus competitive no-dig products. US Patent No. D748,823 and Canadian Patent No. 154108.
EasyFlex® Locking Tree Ties hold support stakes to smaller trees and serve a variety of other horticultural uses. The flexible chain is available in 1/2″ and 1″ widths and is simply pulled through itself and twisted into a locking position. Our locking ties are formulated for increased flexibility and minimizing damage to tree surface. Cuts easily with standard scissors or garden shears and has multipurpose function for other household uses like bundling cords and hoses.
Details:
Flexible, self-locking chain for use on plants and small trees
Holds support stakes to smaller trees
Holds climbing plants to trellises, arbors, & lattice
Holds tomato plants to stakes
Holds grapevines to support wires
Also great for bundling cords & hoses
Available in 100’ and 250’ boxed coils
Manufactured in the USA from recycled plastic compound
Available Options:
EasyFlex® ½” Wide Locking Tree Tie EasyFlex® 1” Wide Locking Tree Tie
Keep your flat pile carpet and hard floors looking new with MotionTex® Fitness Equipment Mats. Protect your surfaces from the damage, noise, and vibration caused by a stationary bike, rowing machine, treadmill, or elliptical. Use your exercise machines safely with a slip-resistant top texture and rounded corners that reduce the risk of falling or tripping on a curled edge.
Recycled PVC provides a non-absorbent surface that repels water, sweat, grease, and other liquids during your workout. Each mat contains an antimicrobial and fungistatic agent to protect the mat from microorganisms that can cause it to deteriorate. When ready to put away, simply clean with soap and water and roll for easy storage.
Details:
Available in a variety of sizes to protect floors under almost any exercise machine.
Protect your flat pile carpet and hard floors from damage, noise, and vibration caused by fitness or home gym equipment.
Designed with non-absorbent recycled PVC to repel water, sweat, grease, and other liquids during your workout.
Non-directional top texture provides a slip resistant surface, and rounded corners keep the mat from curling – reducing the chance of falling or tripping on the mat.
When ready to clean, simply rinse with soap and water.
Keep your floors looking new with VersaTex® multipurpose utility mats. Protect your indoor and outdoor surfaces from potential scratches and damage caused by lawn tools, heavy equipment, and liquid spills or splatters. Designed with a non-directional top texture, VersaTex® rubber or PVC mats catch water, mud, and debris to provide traction on wet surfaces.
This commercial-grade mat can be easily cut to size to fit your space with scissors or a utility knife. Made with non-absorbent recycled synthetic rubber or PVC, VersaTex® mats are the true multipurpose solution for your home and business surfaces. Catch water and mud in entryways to provide a safer walking surface. Place on the floor of your garage to offer protection from lawn equipment, tools, bicycles, and sporting equipment. Use in front of workbenches to assure a clean workspace. Use a PVC VersaTex® mat underneath your grill to protect your patio from drips, spills, and splatters with heat resistance up to 500° Fahrenheit. Each mat contains an antimicrobial and fungistatic agent to protect it from microorganisms that can cause it to deteriorate. When ready to put away, simply clean with soap and water and roll for easy storage.
Details:
This commercial grade mat provides traction and protects indoor and outdoor surfaces from water, dirt, spills, and equipment.
Nondirectional top texture traps water and mud to provide a safer walking surface – perfect for entryways and breezeways in homes and businesses.
Recycled synthetic rubber and PVC mats repel water, grease, oils, and other liquids.
Provide traction under foot and protection for floors underneath fitness equipment, work benches, and lawn and sporting equipment in homes, garages, and workshops.
Place in front of doorways to catch dirt, mud, and debris or use underneath grills to protect your patio from drips, spills, and splatters.
EdgePro® Aluminum Landscape Edging is the perfect balance of strength and flexibility. Manufactured from 6063-T6 extruded aluminum alloy in a 1/8″ thickness, EdgePro® Aluminum is suitable for most edging applications, particularly those that require greater flexibility such as tree rings. EdgePro® Aluminum is a 4″ high with horizontal grooved design that allows better grip in the soil. The dual stake connections properly align and lock ends together, providing a virtually seamless joint with no overlapping. EdgePro® Aluminum Landscape Edging is manufactured in the USA from recycled aluminum materials. Kits includes three stakes with each piece of 8’ edging and four end stake adapters per case.
Why aluminum?
Aluminum withstands years of maintenance abuse and is resistant to corrosion
Aluminum is lightweight and flexible for making curves
Aluminum is not susceptible to thermal expansion and contraction with temperature change
Dimex™ Rubber Control Joints are extruded rubber gaskets used in industrial and commercial block construction to reduce air and water penetration. The recycled synthetic rubber compound conforms to ASTM D-2000 2AA-805 with a durometer hardness of 80±5 Shore A when tested in conformance with ASTM D-2240. Dimex™ Rubber Control Joints are available in the following profile options:
Black (48” Lengths)
DX2010 – 2.625” Standard Rubber Control Joint DX2112 – 6.875” Wide Flange Rubber Control Joint DX2113 – 11.125” Wide Flange Rubber Control Joint
Black (32” Lengths)
DX2114 – 2.625” Tee Rubber Control Joint DX2015 – 2.125” Standard Rubber Control Joint DX2118 – 6.875” Wide Flange Rubber Control Joint DX2119 – 11.125” Wide Flange Rubber Control Joint
Dimex™ roll-n-go® office chair mats change the way people buy chair mats: they’re roll-able. Like Dimex’s other lines of chair mats, roll-n-go® chair mats are at the top of the market in terms of quality and durability with added transport and handling benefits from the ability to roll the mat. Our chair mats are designed to provide industry-leading clarity, superior wear resistance, and a surface that allows chairs to move freely. Replacing or repairing floors can be expensive, and our durable chair mats protect the investment from wear due to the wheels of office chairs rolling back and forth over time. Dimex’s proprietary material formula is engineered to provide industry-leading performance, and our chair mats pass rigorous roller wear, extreme temperature change, humidity, and stain resistance testing. Our roll-n-go® office chair mats ship flat in packaging designed to protect the product and provide the very best possible unpacking experience.
Details:
Available in multiple sizes for hardwood floors and medium pile carpet
Wear tested for durability and resistance to cracking
Dimex wide flat rib vinyl runner matting is oil, grease, and chemical resistant. Wide Flat Rib vinyl runner is designed for heavy-duty applications. It allows for sure-footedness and easy cleaning and acts as scraper to trap debris and water. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex wide flat rib rubber runner matting performs at low temperatures and is suitable for indoor and outdoor use. Wide flat rib rubber runner is designed for heavy-duty applications. This design provides sure footedness, easy cleaning, and acts as scraper to trap debris and water. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, gauges, widths, and lengths are available
Dimex manufactures vinyl sheeting, gasketing, and packing material in three grades. The sheeting is smooth on the top and bottom. Dimex sheeting can be used for various applications, such as workbench tops, tool cribs, chair protection, shelf liners, and numerous OEM applications.
Physical Property Tensile Strength Elongation Graves Tear Strength Hardness (Shore A) Specific Gravity
The MIL-DTL-15562G specification for insulating, switchboard, matting and sheet floor covering is designed for use around electrical apparatus and circuits. This specification is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense. Dimex switchboard matting and sheet floor covering meets the MIL-DTL-15562G additional property specifications for performance of Oxygen Bomb Aging, Sulfuric Acid and Ultraviolet Light Exposure.
Please consult “Naval Ships Technical Manual Chapter 634 – Deck Coverings” for specific guidelines for installation of MIL-DTL-15562G, Type I, II or III.
This heavy-duty switchboard matting and sheet material is used by the commercial marine industry as well as the military and avionics. Each roll of Dimex military switchboard matting is certified to the MIL-DTL-15562G specifications.
MIL-DTL-15562G Type III: (³⁄16″ thickness) The Type III diamond plate surface is slip-resistant, fire-retardant, electrically insulating matting and is installed as a portable runner in front of equipment and on workbenches. This runner is manufactured in gray or green. The MIL-DTL-15562G Type III runner is used by the Department of Defense and in many industrial and commercial applications.
Dielectric Test Voltage Proof Tested Over Entire Surface at Recommended Maximum Use Voltage
The MIL-DTL-15562G specification for insulating, switchboard, matting and sheet floor covering is designed for use around electrical apparatus and circuits. This specification is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense. Dimex switchboard matting and sheet floor covering meets the MIL-DTL-15562G additional property specifications for performance of Oxygen Bomb Aging, Sulfuric Acid and Ultraviolet Light Exposure.
Please consult “Naval Ships Technical Manual Chapter 634 – Deck Coverings” for specific guidelines for installation of MIL-DTL-15562G, Type I, II or III.
This heavy-duty switchboard matting and sheet material is used by the commercial marine industry as well as the military and avionics. Each roll of Dimex military switchboard matting is certified to the MIL-DTL-15562G specifications.
MIL-DTL-15562G Type II: (¹⁄8″ thickness) The Type II smooth surface is fire-retardant, electrically insulating matting used as a portable runner in front of equipment and on workbenches. This runner is manufactured in black, blue, or green.
Dielectric Test Voltage Proof Tested Over Entire Surface at Recommended Maximum Use Voltage
Type II Dimex ASTM D178 Switchboard Matting is insulating and engineered to protect workers against electrical shock when working around high voltage applications within product specifications. This matting is tested and certified to the most rigorous industry standards. Every roll is proof tested at the specified voltage, over the entire surface of the matting. The type defines the compound that is used in the manufacture of the switchboard matting in the ASTM D-178 specification. Type II is defined as “…made of any elastomer or combination of elastomeric compounds with…the following special properties…Ozone Resistance…Flame Resistance and Oil Resistance…” Type II, Class 1 (3/16” thickness) is proof tested over the entire surface at 10,000 VAC with recommended maximum use voltage 7,500 VAC. Type II, Class 2 (1/4” thickness) is proof tested over the entire surface at 20,000 VAC with recommended maximum use voltage 17,000 VAC. Type II, Class 3 (3/8” thickness) is proof tested over the entire surface at 30,000 VAC with recommended maximum use voltage 26,500 VAC. Type II, Class 4 (1/2” thickness) is proof tested over the entire surface at 40,000 VAC with recommended maximum use voltage 36,000 VAC. Our switchboard matting is made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Recommended For: Distribution Boards, Switchgear, Sub-stations, Transformers, Generators, Electrical Workbenches
The MIL-DTL-15562G specification for insulating, switchboard, matting and sheet floor covering is designed for use around electrical apparatus and circuits. This specification is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense. Dimex switchboard matting and sheet floor covering meets the MIL-DTL-15562G additional property specifications for performance of Oxygen Bomb Aging, Sulfuric Acid and Ultraviolet Light Exposure.
Please consult “Naval Ships Technical Manual Chapter 634 – Deck Coverings” for specific guidelines for installation of MIL-DTL-15562G, Type I, II or III.
This heavy-duty switchboard matting and sheet material is used by the commercial marine industry as well as the military and avionics. Each roll of Dimex military switchboard matting is certified to the MIL-DTL-15562G specifications.
MIL-DTL-15562G Type I: (¹⁄8″ thickness) Durable, marbleized, fire-retardant, electrically insulating surface is installed in naval vessels in high-voltage compartments. Type I offers aesthetics and water-tight integrity with heat welded seams. The Type I Sheeting is available in multiple colors in standard or high gloss finishes. Matching color welding thread is also available.
Dielectric Test Voltage
Proof Tested Over Entire Surface at Recommended Maximum Use Voltage
Type I Dimex ASTM D178 Switchboard Matting is insulating and engineered to protect workers against electrical shock when working around high voltage applications within product specifications. This matting is tested and certified to the most rigorous industry standards. Every roll is proof tested at the specified voltage, over the entire surface of the matting. The type defines the compound that is used in the manufacture of the switchboard matting in the ASTM D-178 specification. Type I is defined as “…made of any elastomer or combination of elastomer compounds, properly vulcanized.” Type I, Class 2 (1/4” thickness) is proof tested over the entire surface at 20,000 VAC with recommended maximum use voltage 17,000 VAC. Our switchboard matting is made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Recommended For: Distribution Boards, Switchgear, Sub-stations, Transformers, Generators, Electrical Workbenches
Dimex tile top vinyl runner matting is oil, grease, and chemical resistant. This matting has a smooth 3/32″ marbleized surface available in multiple colors, including black/white, charcoal, gray, and blue. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, widths, and lengths are available
Single piece roll guarantee • Meets the requirements of FMVSS 302
Dimex smooth electrically conductive matting drains off static electricity, preventing damage to vulnerable equipment. This conductive runner matting is smooth on the top and the bottom. Smooth electrically conductive matting is available in 5/32″ diamond plate or 3/32″ smooth surfaces. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex round rib vinyl runner matting is oil, grease, and chemical resistant. Round rib vinyl runner is comfortable and easy to clean. Semi-circular ribs are spaced far apart to allow for easy sweeping and mopping. The ribbing runs lengthwise and has a textured back. We offer various thicknesses to meet a variety of OEM application requirements for use in extreme high-traffic areas, including recreational areas. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, gauges, widths, and lengths are available
Dimex ripple vinyl runner has a non-directional textured finish, with an attractive, easy-to-clean design. Easily customized, this versatile runner is durable and abrasive resistant. It has a smooth backing and is designed for limitless OEM applications.
Dimex ripple rubber runner matting performs at low temperatures and is suitable for indoor and outdoor use. The ripple rubber runner has a non-directional textured finish with an attractive and easy-to-clean design. Easily customized, this versatile runner is durable and abrasive resistant. It has a smooth backing and is designed for limitless OEM applications. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, gauges, widths, and lengths are available
Dimex supplies post-industrial recycled PVC compounds to environmentally friendly companies to meet their own economic and green initiatives. As one of the largest compounders of recycled plastic scrap, we have state-of the-art engineering and equipment that allows us to produce high-performing materials that meet application specifications and certification requirements across various industries. Our formulations result in products that have proven to outperform other materials in durability, flexibility, and visual appeal.
Because we use our own materials in our products, rest assured that they are the best materials available. We are uniquely positioned to not only understand your needs but to also have the engineering, formulation, manufacturing, testing, and distribution capabilities to meet these needs quickly and effectively.
Contact us to learn more about our custom blends and value-added capabilities.
Dimex supplies post-industrial recycled TPE compounds to environmentally friendly companies to meet their own economic and green initiatives. As one of the largest compounders of recycled plastic scrap, we have state-of the-art engineering and equipment that allows us to produce high-performing materials that meet application specifications and certification requirements across various industries. Our formulations result in products that have proven to outperform other materials in durability, flexibility, and visual appeal.
Because we use our own materials in our products, rest assured that they are the best materials available. We are uniquely positioned to not only understand your needs but to also have the engineering, formulation, manufacturing, testing, and distribution capabilities to meet these needs quickly and effectively.
Contact us to learn more about our custom blends and value-added capabilities.
Dimex Klear Carpet Protective vinyl runner matting is oil, grease, and chemical resistant. This runner matting is heavy-gauge clear vinyl that protects carpet from damage and allows the beauty to show through. The matting features pointed grippers on the back to keep runner in place, and it is available in three different sizes. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex manufactures vinyl sheeting, gasketing, and packing material in three grades. The sheeting is smooth on the top and bottom. Dimex sheeting can be used for various applications, such as workbench tops, tool cribs, chair protection, shelf liners, and numerous OEM applications.
Dimex pyramid vinyl runner matting is oil, grease, and chemical resistant. This vinyl runner is a non-directional Pyramid pattern with exceptional slip resistance. The top pattern is a continuous pyramid design that assures safer foot traffic. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex manufactures vinyl sheeting, gasketing, and packing material in three grades. The sheeting is smooth on the top and bottom. Dimex sheeting can be used for various applications, such as workbench tops, tool cribs, chair protection, shelf liners, and numerous OEM applications.
Dimex General Purpose Sheet Typical Physical Properties:
Physical Property Tensile Strength Elongation Graves Tear Strength Hardness (Shore A) Specific Gravity
Dimex nickel tile vinyl runner matting is oil, grease, and chemical resistant. This matting is available in black with 1/8″ thickness. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex manufactures vinyl sheeting, gasketing, and packing material in three grades. The sheeting is smooth on the top and bottom. Dimex sheeting can be used for various applications, such as workbench tops, tool cribs, chair protection, shelf liners, and numerous OEM applications.
Dimex diamond plate vinyl runner matting is oil, grease, and chemical resistant. With its high-profile diamond embossed top surface, our diamond plate vinyl runner yields exceptional traction from any direction. The surface sweeps clean easily and will accommodate rolling carts. The diamond plate vinyl runner matting is available in black and gray with the option to add yellow longitudinal borders for designating safe walkways. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex diamond plate electrically conductive matting drains off static electricity, preventing damage to vulnerable equipment. This matting is a conductive runner with high profile diamond embossed top surface allowing traction from any direction. The surface sweeps easily and will accommodate rolling carts. Diamond plate electrically conductive matting is available in 5/32″ diamond plate or 3/32″ smooth surfaces. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Dimex corrugated vinyl runner matting is oil, grease, and chemical resistant. Corrugated vinyl runner is designed with an angular tooth top pattern and a textured back. This matting protects floors, reduces slips and falls, and provides a silencing effect. We offer various thicknesses and back textures to meet various OEM application requirements for better adhesion and use in extreme high-traffic areas. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, gauges, widths, and lengths are available
Dimex corrugated rubber runner matting performs at low temperatures and is suitable for indoor and outdoor use. Corrugated rubber runner is designed with an angular tooth top pattern and a textured back. This runner fulfills a variety of needs, including floor protection and reduction of slips and falls, and it provides a silencing effect. Our runner mats are made in the USA, and we’re an eco-friendly company committed to recycled materials whenever possible.
Details:
Custom colors, gauges, widths, and lengths are available
Unlike other metal edging products such as steel, aluminum is lighter, easier to work with, and does not rust or corrode. The overlapping connection design eliminates the need for a separate connector. Because aluminum materials are unaffected in hot climates, aluminum edging is a very popular choice in Southern and West Coast regions.
Details:
Kit includes edging and spikes
Sold in box kits or individual pieces
Available in multiple finishes
Easy sliding installation
Creates straight runs and curves with ease
Permanent & low maintenance
Rust and crack resistant
Manufactured in the USA from recycled aluminum materials
