Type I, Type II, and Type III MIL-DTL-15562G Military Switchboard Matting







The MIL-DTL-15562G specification for insulating switchboard matting and sheet floor covering is designed for use around electrical apparatus and circuits. This specification is approved for use by the Department of the Navy and is available for use by all departments and agencies of the Department of Defense. Dimex™ MIL-DTL-15562G Switchboard Matting and sheet floor covering meets the additional property specifications for performance of Oxygen Bomb Aging, Sulfuric Acid, and Ultraviolet Light Exposure. Download the information sheet.
Each roll of Dimex™ Military Switchboard Matting is certified to the MIL-DTL-15562G specifications.
Type I, Type II, and Type III | |
Dielectric Test Voltage | 30,000 VAC |
Proof Tested Over Entire Surface at | 15,000 VAC |
Recommended Maximum Use Voltage | 3,000 VAC |
MIL-DTL-15562G Type I: (1/8″ thickness)
Durable, marbleized, fire-retardant, electrically insulating surface is installed in naval vessels in high-voltage compartments. Type I offers aesthetics and water-tight integrity with heat welded seams. The Type I Sheeting is available in multiple colors in Standard or High Gloss Finishes. Matching color welding thread is also available.
Available Options:
Product | Width | Length | Color | NSN# |
Type I Standard and High Gloss | 36” | 75’ | Blue | 7220-01-024-9040 |
1/8” Smooth Marbleized Sheet | ||||
Welding Thread | 300’ | Blue | ||
Colors :
Standard Gloss

High Gloss

MIL-DTL-15562G Type II: (1/8″ thickness)
The Type II smooth surface is fire-retardant, electrically insulating matting used as a portable runner in front of equipment and on workbenches. This runner is manufactured in black, blue, or green.
Available Options:
Product | Width | Length | Color | NSN# | |
Type II | 24” | 75’ | Black | 7220-00-255-0765 | |
1/8” Smooth Runner | 36″ | 75′ | Black | ||
36” | 75’ | Blue | 7220-00-267-4630 | ||
36” | 75’ | Green | 7220-00-913-8751 |
Colors:



MIL-DTL-15562G Type III: (3/16″ thickness)
The Type III diamond plate surface is slip-resistant, fire-retardant, electrically insulating matting and is installed as a portable runner in front of equipment and on workbenches. This runner is manufactured in gray or green. The MIL-DTL-15562G Type III runner is used by the Department of Defense and in many industrial and commercial applications.
Available Options:
Product | Width | Length | Color | NSN# |
Type III | 36″” | 75’ | Gray | 7220-01-057-1897 |
3/16” Diamond Runner | 36″ | 75′ | Green | 7220-01-056-1944 |
Colors:


Our Other Matting:
ASTM D178 Switchboard Matting
Conductive Matting
Vinyl Runner Matting
Rubber Runner Matting
Vinyl Sheeting